EPOMAKER x AULA F99 Pro: First Look and Setup Tips
By EPOMAKER — Crafted to sound right. | Published: 2026-10-26
Category: How-to Guides
Get a quick first look at the EPOMAKER x AULA F99 Pro, then follow six setup steps that cover cable routing, knob binding, and sound tuning.
Quick answer
The EPOMAKER x AULA F99 Pro is a 96% mechanical keyboard with a rotary knob and gasket mount; set it up in about ten minutes by following the six steps below.
Why the F99 Pro layout is worth a closer look
The F99 Pro builds on the F99 by adding a rotary knob and one extra key, so you get most of a traditional 108-key layout in a more compact frame. That means you keep the number pad and navigation cluster while freeing up desk space for a mouse or a notepad.
The gasket mount helps dampen vibrations and gives the typing feel a bit of flex. If you are coming from a tray-mounted board, expect a softer bottom-out and a slightly different sound profile. You can adjust to this by typing for a few minutes before deciding if you want to mod anything.
What the knob adds beyond volume
The rotary knob is the main addition compared to the F99. Out of the box it usually controls volume, but you can remap it to zoom, scroll, or switch applications depending on your operating system and software.
If you use the knob frequently, place the keyboard so the knob is on the side you reach with your non-dominant hand. This keeps your main hand on the mouse and makes adjustments quicker.
Six-step F99 Pro setup
- Unbox and check contents: Open the box and confirm you have the keyboard, USB cable, keycap puller, and any extra keycaps. If anything is missing, contact support before proceeding. Take a photo of the contents for reference if you plan to return or exchange.
- Connect the cable securely: Plug the USB cable into the keyboard and then into your computer. Use a direct port on the motherboard or a powered hub; avoid unpowered hubs that can cause intermittent disconnects. If the keyboard is not detected, try a different cable or port before assuming a defect.
- Install or open the companion software: Download the official software for the F99 Pro from the EPOMAKER support page. If the software is not required for your basic use, skip it, but you will need it for remapping keys or the knob. Check for a newer version after installation; updates sometimes fix connection or lighting bugs.
- Test every key and the knob: Use a keyboard tester website or a text editor to press each key, including the Fn layer and the knob rotation and press. This catches dead keys or a faulty encoder early. If a key does not register, reseat the keycap and switch before contacting support.
- Bind the knob to your most-used action: In the software, assign the knob to volume, zoom, or scroll based on your workflow. If you edit video, zoom might be more useful than volume. Set the knob press to mute or play/pause for quick control without reaching for the mouse.
- Adjust typing feel and sound: Type for a few minutes and listen for any hollow or pingy sounds. If the spacebar sounds loud, consider adding a small piece of foam or a band-aid mod to the stabilizers. Do not open the case during the return window unless you are comfortable with potential warranty implications.
Product facts
- EPOMAKER x AULA F99 Pro: The F99 Pro uses a 96% layout with a rotary knob and one extra key, keeping most keys of a traditional 108-key keyboard in a more compact size. You get a full number pad and navigation cluster without giving up as much desk space as a full-size board.
EPOMAKER x AULA F99 Pro - EPOMAKER x AULA F99 Pro: The AULA F99 Pro employs a gasket mount that effectively dampens vibrations. The gasket mount gives a softer, more cushioned typing feel and can reduce hollow sounds, especially on larger keys.
